BOOKS

  • Santulli C, A thermoacoustic study of post-impact behaviour in composites, VDM Verlag, 216 pp., 2010, ISBN 9783639223743.
  • Santulli C, Milani L, Biomimetica: la lezione della natura, CiEsse Edizioni, 2012, 128 pp., ISBN 978-88-6660-026-8.
  • JOURNAL PAPERS

    2016

  • Mat Jusoh MS, Santulli C, Yazid MY, Hussein NS, Ahmad HI, Effect of stacking sequence on the tensile and flexural properties of glass fibre epoxy composites hybridized with basalt, flax or jute fibres, Material Science and Engineering with Advanced Research 1 (4), 2016.
  • Nisini E, Santulli C, Liverani A, Mechanical and impact characterization of hybrid composite laminates with carbon, basalt and flax fibres, Accepted for publication on Composites Part B, June 2016.
  • Colotto G, Santulli C, Giacomucci R, Produzione di oggetti di design per il catering da plastiche a base di latte autoprodotte, Scienze e Ricerche n. 25, 15 March 2016, 79-88.
  • Puglia D, Dominici F, Badalotti M, Santulli C, Kenny JM, Tensile, thermal and morphologcal characterization of Cocoa Bean Shells (CBS)/Polycaprolactone based composites, Accepted for publication in Journal of Renewable Materials, March 2016.
  • Sfarra S, Regi M, Santulli C, Sarasini F, Tirillò J, Perilli S, An innovative nondestructive perspective for the prediction of the effect of environmental aging on impacted composite materials, Journal of Engineering 102, 2016, 55–76. >/LI>
  • Santulli C, Use of natural fibres in the development of advanced composite materials, Compositi Magazine n.38, 2015, 43-47 (in Italian and in English).
  • Sarasini F, Tirillò J, D’Altilia S, Valente T, Santulli C, Touchard F, Chocinski-Arnault L, Mellier D, Lampani L, Gaudenzi P, Damage tolerance of carbon/flax hybrid composites subjected to low velocity impact Composites Part B 91, 2016, 144-153.
  • Jefferson AJ, Arumugam V, Santulli C, Effect of post-cure temperature and different reinforcements in adhesive bonded repair for damaged glass/epoxy composites under multiple quasi-static indentation loading, Composite Structures 143, 2016, 63-74.
  • 2015
  • Jefferson AJ, Arumugam V, Santulli C, Jennifers A, Poorani M, Failure modes in fiberglass after multiple impacts: an acoustic emission and digital image correlation study, Journal of Engineering and Technology 8 (2), 2015, paper n.4.
  • Sisira Sukumaran CP, Visakh PM, Santulli C, β-cyclodextrin nanosponges (NS) based natural rubber latex (NR) nanocomposites: tensile, thermal and morphological characterization, Malaysian Polymer Journal 10 (2), 2015, 75-82.
  • Santulli C, Langella C, Study and development of concepts of auxetic structures in bio-inspired design, Accepted for publication in International Journal of Sustainable Design, October 2015.
  • Santulli C, Sajit S, Arumugam V, Failure mode discrimination in mode II fracture of glass/epoxy laminates using acoustic emission technique, Materials Science and Engineering with Advanced Research 1 (1), 2015.
  • Fragassa C, Santulli C, Pavlović A, Šljivić M, Improving performance and applicability of green composite materials by hybridization, Contemporary Materials VI−1, 2015, 35-43.
  • Puglia D, Dominici F, Kenny JM, Santulli C, Governatori C, Tosti G, Benincasa P, Effect of baking technological properties on mechanical performance of thermoplastic wheat flours, Accepted for publication on Journal of Polymers and the Environment, September 2015.
  • Santulli C, Balestrieri F, Mazzetti C, De Mestres P, Thermomechanical and electrical characterisation of EVA polymer compounds for cable accessories, Accepted for publication on European Journal of Physics B, September 2015.
  • Jefferson Andrew J, Arumugam V, Saravanakumar K, Dhakal HN, Santulli C, Compression after impact strength of repaired GFRP composite laminates under repeated impact loading, Composite Structures 113, 2015, 911-920.
  • Petrucci R, Nisini E, Puglia D, Sarasini F, Rallini M, Santulli C, Minak G, Kenny JM, Tensile and fatigue characterisation of textile cotton waste/polypropylene laminates, Composites Part B 81, Nov, 2015, 84-90.
  • Petrucci R, Dominici F, Santulli C, Puglia D, Kenny JM, Mechanical and thermal characterisation of poly(ethylene) and thermoplastic starch filled with keratin horn powder from bovine claws, Materials Science and Engineering with Advanced Research 1 (1), 2015.
  • Carnevale T, Santulli C, Esistono realmente materiali bio-ispirati? Uno studio in base ad alcune proprietà caratteristiche, Scienze e Ricerche n.7, May 2015, 109-113.
  • Sarasini F, Tirillò J, Puglia D, Kenny JM, Dominici F, Santulli C, Tofani M, De Santis R, Effect of different lignocellulosic fibres on poly(ε-caprolactone)-based composites for potential applications in orthotics, RSC Advances 5, 2015, 23798-23809.
  • Petrucci R, Santulli C, Puglia D, Nisini E, Sarasini F, Tirillò J, Torre L, Minak G, Kenny JM, Impact and post-impact damage characterisation of hybrid composite laminates based on basalt fibres in combination with flax, hemp and glass fibres manufactured by vacuum infusion, Composites Part B 69, 2015, 507-515.
  • Kakakasery J, Arumugam V, Abdul Rauf K, Bull D, Chambers AR, Scarponi C, Santulli C, Cure cycle effect on impact resistance under elevated temperatures in carbon prepreg laminates investigated using acoustic emission, Composites Part B 75, 2015, 298–306.
  • Fortunati E, Aluigi A, Armentano I, Morena F, Emiliani C, Martino S, Santulli C, Torre L, Kenny JM, Puglia D, Keratins extracted from Merino wool and Brown Alpaca fibres: Thermal, mechanical and biological properties of PLLA based biocomposites, Materials Science and Engineering: C 47, 1 February 2015, 394–406.
  • Arthurs B, Bull DJ, Arumugam V, Chambers AR, Santulli C, Porosity effect on residual flexural strength following low energy impact of carbon fibre composites, Polymers and Polymer Composites 23, 2015, 205-212.
  • Balan R, Arumugam V, Abdul Rauf K, Adhithya Plato Sidharth A, Santulli C, Estimation of residual flexural strength of unidirectional GFRP composite laminates under repeated impact load, Journal of Composite Materials, 49 (6), 2015, 713-722.
  • 2014

  • Rognoli V, Santulli C, L’approccio della fratelli Guzzini ai materiali, AIS Design Storia e Ricerche 4, 2014, ID:0405.
  • Arumugam V, Adhithya Plato Sidharth A, Santulli C, Failure modes characterization of impacted CFRP laminates under compression loading using acoustic emission, Journal of Composite Materials 48 (28), 3457-3468.
  • Arumugam V, Adhithya Plato Sidharth A, Santulli C, Characterization of failure modes in compression-after impact of glass–epoxy composite laminates using acoustic emission monitoring, Online on Journal of the Brazilian Society of Mechanical Sciences and Engineering, October 2014.
  • Sfarra S, Ibarra-Castanedo C, Santulli C, Paoletti D, Maldague X, Monitoring of jute/hemp fiber hybrid laminates by non-destructive testing techniques, Accepted for publication on Science and Engineering of Composite Materials, September 2014
  • Vasconcellos D, Sarasini F, Touchard F, Chocinski-Arnault L, Pucci M, Santulli C, Tirillò J, Fatigue post-impact d’un composite à renfort tissé de fibres de chanvre et matrice époxy, Matériaux & Techniques 102 (3), 2014.
  • Aluigi A, Tonetti C, Rombaldoni F, Puglia D, Fortunati E, Armentano I, Santulli C, Torre L, Kenny JM, Keratins extracted from Merino wool and Brown Alpaca fibres as potential filler for PLLA-based biocomposites, Journal of Materials Science 49 (18), 2014, 6257-6269.
  • Suvarna R, Arumugam V, Bull DJ, Chambers AR , Santulli C, Effect of temperature on low velocity impact damage and post-impact flexural strength of CFRP assessed using ultrasonic c-scan and micro-focus computed tomography, Composites Part B 66, November 2014, 58–64.
  • de Vasconcellos DS, Sarasini F, Touchard F, Chocinski-Arnault L, Pucci M, Santulli C, Tirillò J, Iannace S, Sorrentino L, Influence of low velocity impact on fatigue behaviour of woven hemp fibre reinforced epoxy composites, Composites Part B 66, November 2014, 46–57.
  • Fortunati E, Luzi F, Puglia D, Dominici F, Santulli C, Kenny JM, Torre L, Investigation of thermo-mechanical, chemical and degradative properties of PLA-limonene films reinforced with cellulose nanocrystals extracted from Phormium tenax leaves, European Polymer Journal 56, 2014, 77–91.
  • Santulli C, Puglia D, Rallini M, Visakh PM, Kenny JM, Thomas M, Natural rubber composites filled with a low volume of crab chitin whiskers: Mechanical and thermal characterization, Malaysian Polymer Journal 9 (1), 2014, 18-23.
  • Luzi F, Fortunati E, Puglia D, Lavorgna M, Santulli C, Kenny JM; Torre L, Optimized extraction of cellulose nanocrystals from pristine and carded hemp fibres, Industrial Crops Products 56, 2014, 175–186.
  • Dhakal HN, Arumugam V, Aswinraj A, Santulli C, Zhang ZY, Lopez-Arraiza A, Influence of temperature and impact velocity on the impact response of jute/UP composites, Polymer Testing 35, 2014, 10-19.
  • Puglia D, Santulli C, Sarasini F, Kenny JM, Valente T, Thermal and mechanical characterization of phormium tenax reinforced polypropylene composites, Journal of Thermoplastic Composite Materials 27 (11), 2014, 1493-1503.
  • Akil H Md, Santulli C, Sarasini F, Tirillò J, Valente T, Environmental effects on the mechanical behaviour of pultruded jute/glass fibre-reinforced polyester hybrid composites, Composites Science and Technology 94, 2014, 62-70.
  • Boominathan R, Arumugam V, Santulli C, Adhithya Plato Sidharth A, Anand Sankar R, Sridhar BTN, Acoustic emission characterization of the temperature effect on falling weight impact damage in carbon/epoxy laminates, Composites Part B 56, 2014, 591-598.
  • 2013

  • Valente M, Sarasini F, Pulci G, Marra F, Tirillò J, Santulli C, Static and dynamic behaviour of hybrid composites, JEC Composites Magazine n. 85, Dec. 2013, 51-60.
  • Fortunati E, Luzi F, Puglia D, Terenzi A, Vercellino M, Visai L, Santulli C, Torre L, Kenny JM,Ternary PVA nanocomposites containing cellulose nanocrystals from different sources and silver particles: Part II, Carbohydrate Polymers 97 (2), 2013, 837-848.
  • Sarasini F, Puglia D, Fortunati E, Kenny JM, Santulli C, Effect of fiber surface treatments on thermo-mechanical behavior of poly(lactic acid)/phormium tenax composites, Journal of Polymers and the Environment 21 (3), 2013, 881-891.
  • Sfarra S, Ibarra-Castanedo C, Santulli C, Sarasini F, Ambrosini D, Paoletti D, Maldague X, Eco-friendly laminates: from the indentation to nondestructive evaluation by optical and infrared monitoring techniques, Strain 49 (2), 2013, 175-189.
  • Fortunati E, Puglia D, Luzi F, Santulli C, Torre L, Kenny JM, Binary PVA bio-nanocomposites containing cellulose nanocrystals extracted from different natural sources: Part I Carbohydrate Polymers, Carbohydrate Polymers 97 (2), 2013, 825-836.
  • Santulli C, Sarasini F, Tirillò J, Valente M, Valente T, Caruso AP, Infantino M, Nisini E, Minak G, Mechanical behavior of jute cloth/wool felts hybrid laminates, Materials and Design 50, 2013, 309-321.
  • Fortunati E, Puglia D, Monti M, Santulli C, Maniruzzaman M, Foresti ML, Vazquez A, Kenny JM, Okra (Abelmoschus Esculentus) fibre based PLA composites: mechanical behaviour and biodegradation, Journal of Polymers and the Environment 21 (3), 726-737.
  • Petrucci R, Santulli C, Puglia D, Sarasini F, Torre L, Kenny JM, Mechanical characterisation of hybrid composite laminates based on basalt fibres in combination with flax, hemp and glass fibres manufactured by vacuum infusion, Materials and Design 49, 2013, 726-737.
  • Santulli C, Langella C, + Design - Waste: a project for upcycling refuse using design tools, International Journal of Sustainable Design 2 (2), 2013, 105-127.
  • Sfarra S, Ibarra-Castanedo C, Santulli C, Paoletti A, Paoletti D, Sarasini F, Bendada A, Maldague X, Falling weight impacted glass and basalt fibre woven composites inspected using non-destructive techniques, Composites Part B 45 (1), 2013, 601-608.
  • Puglia D, Monti M, Santulli C, Sarasini F, De Rosa IM, Kenny JM, Effect of alkali and silane treatments on mechanical and thermal behavior of Phormium tenax fibres,Fibers and Polymers 14 (3), 2013, 423-427.
  • Fortunati E, Puglia D, Monti M, Santulli C, Maniruzzaman M, Kenny JM, Cellulose nanocrystals extracted from okra fibres in PVA nanocomposites, Journal of Applied Polymer Science 128 (5), 2013, 3220–3230.
  • 2012

  • Santulli C, Matrix cracking detection by acoustic emission in polymer composites and counts/duration ratio, E-Journal of Non-Destructive Testing 17 (11), November 2012.
  • Fortunati E, Puglia D, Monti M, Santulli C, Kenny JM, Extraction of cellulose nanocrystals from Phormium tenax fibres, Journal of Polymers and the Environment 21 (2), 2013, 319-328.
  • Santulli C, Kuan HT, Sarasini F, De Rosa IM, Cantwell WJ, Damage characterisation on PP-hemp/aluminium fibre metal laminates using acoustic emission, Journal of Composite Materials 47 (18), 2013, 2265-2274.
  • Arumugam V, Kumar S, Santulli C, Sarasini F, Stanley AJ, Identification of failure modes in composites from clustered acoustic emission data using pattern recognition and wavelet transformation, Arabian Journal for Science and Engineering 38 (5), 2013, 1087-1102.
  • Asokan R, Arumugam V, Santulli C, Barath Kumar S, Joseph Stanley A, Acoustic emission monitoring of repaired composite laminates, Journal of Reinforced Plastics and Composites 31(18), 2012, 1226-1235.
  • Fortunati E, Puglia D, Santulli C, Sarasini F, Kenny JM, Biodegradation of phormium tenax/poly/lactic acid) composites, Journal of Applied Polymer Science 125 (S2), 2012, E562-E572.
  • Ghelli D, D'Ubaldo O, Santulli C, Nisini E, Minak G, Falling weight impact and indentation damage characterisation of sandwich panels for marine applications, Open Journal of Composite Materials 2 (1), 2012, 8-14.
  • Visakh PM, Monti M, Puglia D, Rallini M, Santulli C, Sarasini F, Thomas S, Kenny JM, Mechanical and thermal properties of crab chitin reinforced carboxylated SBR composites, Express Polymer Letters 6(5), 2012, 396-409.
  • De Rosa IM, Dhakal HN, Santulli C, Sarasini F, Zhang Z, Post-impact static and cyclic flexural characterisation of hemp fibre reinforced laminates, Composites Part B 43 (3), 2012, 1382-1396.
  • De Rosa IM, Marra F, Pulci G, Santulli C, Sarasini F, Tirill� J, Valente M, Post-impact mechanical characterisation of glass and basalt woven fabric laminates, Applied Composite Materials Volume 19 (3-4), 2012, 475-490.
  • 2011

  • De Rosa IM, Iannoni A, Kenny JM, Puglia D, Santulli C, Sarasini F, Terenzi A, Poly(lactic acid)/phormium tenax composites: morphology and thermo-mechanical behaviour, Polymer Composites 32 (9), 2011, 1362-1368.
  • Asokan R, Arumugam V, Santulli C, Barath Kumar S, Joseph Stanley A, Investigation of the strength of the failure modes in GFRP laminates using acoustic emission monitoring, International Journal of Polymers and Technologies 3 (2), 2011, 57-65.
  • Santulli C, Selezione dei materiali e bio-ispirazione, Scienza e Filosofia n.6, December 2011, 17-22.
  • Fortunati E, Monti M, Puglia D, Kenny JM, Torre L, Santulli C, Bioplastic nano-reinforcement extracted from phormium leaf fibers, Plastic Research Online November 2011, DOI: 10.1002/spepro.003937
  • Arumugam V, Kumar S, Santulli C, Stanley AJ, Effect of fiber orientation in uni-directional glass epoxy laminate using acoustic emission monitoring, Acta Metallurgica Sinica (English letters) 24 (5), 2011, 351-364.
  • Santulli C, Sarasini F, Acoustic emission for monitoring natural fibre composites, JEC Composites Magazine n.68, October 2011, 81-83.
  • Santulli C, Sarasini F, Puglia D, Kenny JM, Adding plant fibers improves thermomechanical properties of poly(lactic acid) matrix, Plastic Research Online, September 2011, DOI 10.1002/spepro.003850
  • De Rosa IM, Dell'Era A, Pasquali M, Santulli C, Sarasini F, Acoustic emission monitoring of activation behavior of LaNi5 hydrogen storage alloy, Science and Technology of Advanced Materials 12 (4), 2011, 045004.
  • Arumugam V, Kumar S, Santulli C, Sarasini F, Stanley AJ, A global method for the identification of failure modes in fibreglass using acoustic emission, Journal of Testing and Evaluation 39 (5), 2011, 103730.
  • Kuan HTN, Cantwell WJ, Md Akil H, Santulli C, The Fracture Properties of Environmental-Friendly Fiber Metal Laminates, Journal of Reinforced Plastics and Composites 30 (6), 2011, 499-508.
  • Santulli C, Mechanical characterisation of n-isopropylacrylamide (NIPA) gels for use in smart actuators, Malaysian Polymer Journal 6 (1), 2011, 39-50.
  • De Rosa IM, Marra F, Pulci G, Santulli C, Sarasini F, Tirill� J, Valente M,Post-impact mechanical characterisation of e-glass/basalt woven fabric interply hybrid laminates, Express Polymer Letters 5 (5), 2011, 449-459.
  • De Rosa IM, Kenny JM, Maniruzzaman Mohd, Moniruzzaman M, Monti M, Puglia D, Santulli C, Sarasini F, Effect of chemical treatments on the mechanical and thermal behaviour of okra (Abelmoschus Esculentus) fibres, Composites Science and Technology 71 (2), 2011, 246-254.
  • Santulli C, Langella C, Introducing students to bio-inspiration and biomimetic design: a workshop experience, International Journal of Technology and Design Education 21 (4), 2011, 471-485.
  • De Rosa IM, Santulli C, Sarasini F, Mechanical characterization of untreated waste office paper/woven jute fabric hybrid reinforced epoxy composites, Journal of Applied Polymer Science 119 (3), 2011, 1366-1373.
  • 2010

  • Santulli C, A step indentation loading procedure to monitor the effect of impact damage on E-glass/polyester woven laminates using acoustic emission, E-Journal of Nondestructive Testing 15 (11), November 2010.
  • Santulli C, Langella C, Hybridisation between technology and biology in design for sustainability, International Journal of Sustainable Design 1 (3), 2010, 293-304.
  • Caruso AP, De Rosa IM, Santulli C, Sarasini F, Planar indentation of jute/hemp fibre hybrid laminates monitored by acoustic emission, E-Journal of Non Destructive Testing 15 (7), July 2010.
  • De Rosa IM, Kenny JM, Puglia D, Santulli C, Sarasini F, Tensile behavior of New Zealand Flax (Phormium tenax) fibers, Journal of Reinforced Plastics and Composites 29 (23), 2010, 3450-3454.
  • Akil Md H, De Rosa IM, Santulli C, Sarasini F, Flexural behavior of pultruded jute/glass and kenaf/glass hybrid composites monitored using acoustic emission, Materials Science and Engineering A 527 (12), 2010, 2942-2950.
  • De Rosa IM, Santulli C, Sarasini F, Mechanical and thermal characterization of epoxy composites reinforced with random and quasi-unidirectional untreated phormium tenax leaf fibers, Materials and Design 31 (5), 2010, 2397-2405.
  • De Rosa IM, Kenny JM, Puglia D, Santulli C, Sarasini F, Morphological, thermal and mechanical characterization of okra (Abelmoschus Esculentus) fibres as potential reinforcement in polymer composites, Composites Science and Technology 70 (1), 2010, 116-122.
  • 2009

  • Moniruzzaman Md, Maniruzzaman Mohd, Gafur MA, Santulli C, Lady's Finger Fibres for Possible Use as a Reinforcement in Composite Materials, Journal of Biobased Materials and Bionergy 3 (3), 2009, 286-290.
  • Santulli C, Caruso AP, Effect of fibre architecture on the falling weight impact properties of hemp/epoxy composites. Journal of Biobased Materials and Bionergy 3 (3), 2009, 291-297.
  • Santulli C, Jeronimidis G, De Rosa IM, Sarasini F, Mechanical and falling weight impact properties of unidirectional phormium fibre/epoxy laminates, eXPRESS Polymer Letters 3 (10), 2009, 650-656.
  • De Rosa IM, Santulli C, Sarasini F, Characterization of indentation damage on carbon/epoxy laminates by means of acoustic emission and IR thermography, E-Journal of Non-Destructive Testing 14 (5), May 2009.
  • De Rosa IM, Santulli C, Sarasini F, Acoustic emission for monitoring the mechanical behaviour of natural fibre composites: a literature review, Composites Part A 40 (9), 2009, 1456-1469.
  • Santulli C, Caruso AP, A comparative study on falling weight impact properties of jute/epoxy and hemp/epoxy laminates, Malaysian Polymer Journal 4 (1), 2009, 19-29.
  • Dalu L, De Rosa I, Santulli C, Sarasini F, Acoustic emission monitoring of cyclic flexural tests on phormium/epoxy composites, E-Journal of Non Destructive Testing 14 (2), February 2009.
  • De Rosa IM, Santulli C, Sarasini F, Valente M, Post-impact damage characterization of hybrid configurations of jute/glass polyester laminates using acoustic emission and IR thermography, Composites Science and Technology 69 (7-8), 2009, 1142-1150.
  • Donnelly N, Bibas A, Jiang D, Bamiou DE, Santulli C, Jeronimidis G, Fitzgerald O' Connor A, The effect of cochlear implant electrode insertion on middle ear function as measured by intra-operative Laser Doppler Vibrometry, Journal of Laryngology and Otology 123 (7), 2009, 723-729
  • De Rosa IM, Santulli C, Sarasini F, Valente M, Effect of loading-unloading cycles on impact-damaged jute/glass hybrid laminates, Polymer Composites 30 (12), 2009, 1879-1887.
  • Santulli C, Falling weight impact damage characterisation on flax/epoxy laminates, International Journal of Materials and Product Technology 36 (1-4), 2009, 221-228.
  • Caneva C, De Rosa IM, Santulli C, Sarasini F, Effect of untreated celery fibres on epoxy matrix composites, International Journal of Materials and Product Technology 36 (1-4), 2009, 21-29.
  • Santulli C, Marzinotto M, Mazzetti C, Thomas S, Influence of content and diameter of fibres and chemical treatment on the dielectric properties of oil palm fibres - rubber composites, Science and Engineering of Composite Materials 16 (2), 2009, 77-88.
  • 2006-2008

  • De Rosa IM, Santulli C, Sarasini F, Natural fiber composites monitored by acoustic emission, Journal of Acoustic Emission 26, 2008, 220-228.
  • Santulli C, Jeronimidis G, Microscopic lens thermography for the observation of features in light cardboard, E-Journal of Non-Destructive Testing 13(6), June 2008.
  • Santulli C, IR Thermography for the detection of buried objects: a short review, E-Journal of Non-Destructive Testing 12 (12), December 2007.
  • Johnson E, Santulli C, Jeronimidis G, The morphology and mechanics of Orthopteroidea mechanosensors, Comparative Biochemistry and Physiology A -Molecular & Integrative Physiology 146, 2007, p.S135.
  • Jiang D, Bibas A, Santulli C, Jeronimidis G, Fitzgerald O' Connor A, The equivalent noise level generated by drilling onto the ossicular chain as measured by laser Doppler vibrometry: a temporal bone study, Laryngoscope 117 (5), 2007, 1040-1045.
  • Santulli C, Review. Impact properties of glass/plant fibre hybrid laminates, Journal of Materials Science 42 (11), 2007, 3699-3707.
  • Santulli C, Jeronimidis G, Development of a method for nondestructive testing of fruits using scanning laser vibrometry (SLV), E-Journal of Non-Destructive Testing 11 (10), October 2006 .
  • Santulli C, Finn TJ, Seidel R, Jeronimidis G, Scanning LDV for Vibration Measurement of Filiform Hairs in Crickets in Response to Induced Airflow, SPIE Proceedings 645, 2006, E3450.
  • Santulli C, Jeronimidis G, Measurement of surface void content on balsa wood using IR thermography, E-Journal of Non-Destructive Testing 11 (6), June 2006.
  • Santulli C, Post-impact flexural tests on jute/polyester laminates monitored by acoustic emission, Journal of Materials Science 41 (4), 2006, 1255-1260.
  • 2000-2005

  • Santulli C, Patel SI, Jeronimidis G, Davis FJ, Mitchell GR, Development of smart variable stiffness actuators using polymer hydrogels, Smart Materials and Structures 14 (2), 2005, 434-440.
  • Santulli C, Janssen M, Jeronimidis G, Partial replacement of E-glass fibres with flax fibres in composites and effect on falling weight impact performance, Journal of Materials Science 40 (13), 2005, 3581-3585.
  • Santulli C, Critical length measurements in carbon fibres during single fibre fragmentation tests using acoustic emission, Journal of Materials Science 39 (8), 2004, 2905-2907.
  • Santulli C, IR thermography for damage evaluation on automotive composites and components, (in Italian) on Giornale delle Prove Non Distruttive, Monitoraggio e Diagnostica , 4/2003 (in English) on E-Journal of Non-Destructive Testing 8 (9), September 2003.
  • Santulli C, Impact damage characterisation of thermoplastic matrix composites using transmission transient thermography, Nondestructive Testing and Evaluation 19 (2), 2003, September 2003, 79-90.
  • Santulli C, Study of impact hysteresis curves on E-glass reinforced polypropylene laminates, Journal of Materials Science Letters 22 (22), 2003, 1557-1562.
  • Santulli C, Alternatives for a hand lay-up composite structure: E-glass/epoxy adhesive joint or tapered laminate, Journal of Materials Science Letters 21 (24), 2002, 1959-1963.
  • Santulli C, Garcia Gil R, Long AC, Clifford MJ, Void content measurements in thermoplastic composite materials through image analysis from optical micrographs, Science and Engineering of Composite Materials 10 (2), 2002, 77-90.
  • Santulli C, IR thermography study of the effect of moulding parameters on impact resistance in E-glass/polypropylene commingled laminates, NDT&E International 35 (6), December 2002, 377-383.
  • Santulli C, Billi F, Normal and off-axis compression tests of biocompatible titanium dental implants monitored by acoustic emission, Journal of Materials Science Letters 21 (11), 1 June 2002, 727-730.
  • Santulli C, Brooks R, Long AC, Rudd CD, Influence of micro-structural voids on the mechanical and impact properties in commingled E-glass/polypropylene thermoplastic composites, Journal of Materials: Design and Applications Part L, 216 (2), 2002, 85-100.
  • Santulli C, Post-impact damage characterisation of natural fibre reinforced composites using acoustic emission, NDT&E International 33 (6), December 2001, 531-536.
  • Santulli C, Brooks R, Long AC, Warrior NA, Rudd CD, Influence of materials processing on impact properties of compression-moulded commingled thermoplastic composites, Plastics, Rubber and Composites 31 (6), 2002, 270-277.
  • Santulli C, Mechanical and impact properties of untreated jute fabric reinforced polyester laminates compared with different E-glass fibre reinforced laminates, Science and Engineering of Composite Materials 9 (4), 2000, 177-188.
  • Santulli C, Cantwell WJ, Impact damage characterisation on jute/polyester composites, Journal of Materials Science Letters 20 (5), 2001, 471-473.
  • Santulli C, Thermoelastic analysis of phase transition in Ni-Ti shape memory alloys, Journal of Materials Science Letters 19 (12), 2000, 1071-1072.
  • BEFORE 2000

  • Santulli C, Lucia AC, Relation between acoustic emission analysis during cure cycle and bonded joints performances, NDT&E International 32 (6), 1999, 333-341.
  • Santulli C, Billi F, Control of tensile behaviour on shape memory alloys by means of acoustic and thermal emission techniques, Bulletin du Cercle d'Etudes des Metaux 16 (16), November 1997, 12.1-12.14.
  • Billi F, Santulli C, Fatigue thermique sur plaquettes c�ramiques pour outils de coupe par �mission acoustique, Mat�riaux et techniques 85 (9), 1997, 27-36.
  • Lucia AC, Santulli C, Study of mechanical behaviour in shape memory alloys through adiabatic thermal emission and acoustic emission technique, Journal de Physique IV, vol.7, Nov. 1997, Colloque C5, C637-642.
  • Billi F, Santulli C, Thermal fatigue on ceramic coated cutting tips by acoustic emission, Bulletin du Cercle d'Etudes des Metaux 16 (13), November 1996, 14.1-14.17.
  • Gariboldi E, Santulli C, Stivali F, Vedani M, Evaluation of tensile damage in particulate-reinforced MMCs by acoustic emission, Scripta Materialia 35 (2), 1996, 273-277.
  • Gariboldi E, Santulli C, Stivali F, Vedani M, Evaluation of damage in MMC's by acoustic emission technique, Materials Science Forum, 217-222 (3), 1996, 1461-1466.
  • Billi F, Santulli C, Correlation between fracture mechanics and acoustic emission detected during bending tests on ceramic materials by means of statistical methods, Bulletin du Cercle d'Etudes des M�taux 16 (11), November 1995, 20.1-20.22
  • Caneva C, Olivieri S, Santulli C, Bonifazi G, Damage evaluation on advanced stitched composites under impact loads by means of Image Analysis and Acoustic Emission, Composite Structures 25 (1-4), 1993, 121-128.
  • BOOK CHAPTERS

  • Santulli C, Sarasini F, Fortunati E, Puglia D, Kenny JM, Okra Fibres as Potential Reinforcement in Biocomposites, Chap. 11 in “Biomass and Bioenergy. Applications”, Hakeem KR, Jawaid M, Rashid U (Eds.), Springer, 2014, ISBN 978-3-319-07577-8.
  • Santulli C, Sarasini F, Thermosetting biopolymers reinforced with natural fibres, Chap. 6 in “New developments in polymer composite research” S. Laske and A. Witschnigg (eds.), Nova Science Publishers, New York, 2013, 197-212.
  • Sarasini F, Santulli C, Matrix in advanced composites: Vinylester, chap. 7 in “Advanced fibre-reinforced polymer (FRP) composites for structural applications” Woodhead Publishing: editor J Bai, ISBN 0 85709 418 1.
  • Santulli C, Starting from nature. Il design che guarda alla natura, in �Design intersections, il pensiero progettuale intermedio�, a cura di P. Ranzo e C. Langella, Edizioni Franco Angeli, 2012, ISBN 978-8-820411442.
  • Santulli C, Sarasini F, Acoustic Emission for Low Velocity Impact Damage Characterization on Polymer Composites, chap. 8 in �Theory and uses of acoustic emissions�, editor JK Burnett, Nova Publishers 2011, ISBN 978-1-61209-960-6.
  • Santulli C, A biomimetic approach to the production of sustainable structural composites using plant fibres, chap. 5 in "Biologically inspired textiles", editors Ellison MS and Abbott AG, Woodhead Publishing, 2008, ISBN 1 84569 247 0.
  • Santulli C, Biomimetic clues for tissue engineering materials, Proceedings 6th Summer School on Materials Science, Jesi August-September 2004.
  • Santulli C, Biomimetic interest and possibilities of plant fibres for the production of biodegradable impact-resistant composites, Proceedings 5th Summer School on Materials Science, Jesi August 2003.
  • CONFERENCE PAPERS

  • Santulli C, Sarasini F, Tirill� J, Valente T, Valente M, Ferrante L, Caruso AP, Infantino M (in Italian), Use of carded wool felts coupled with jute clothes for hybrid composites, AIMAT Conference, Gaeta September 2012.
  • Petrucci R, Nisini E, Ghelli D, Santulli C, Puglia D, Sarasini F, Minak G, Kenny JM, Mechanical and impact characterisation of hybrid composite laminates based on flax, hemp, basalt and glass fibers produced by vacuum infusion, ECCM15 Conference, Venezia June 2012.
  • Puglia D, Fortunati E, Santulli C, Kenny JM, Cellulose nanocrystals extracted from okra fibres as reinforcement in PVA nanocomposites, 7th International Conference on nanostructured polymers and nanocomposites, Prague April 2012.
  • De Rosa IM, Santulli C, Sarasini F, Non-destructive characterisation of impact damage in natural fibre composites, Italian NDT Conference, Florence October 2011.
  • Fortunati E, Monti M, Puglia D, Santulli C, Kenny JM, Torre L, Cellulose Nanocrystals from Phormium-tenax fibers, AIM Coinference, Terni, September 2011.
  • Sfarra S, Ibarra-Castanedo C, Santulli C, Paoletti A, Paoletti D, Sarasini F, Bendada A, Maldague X, Effect of fiber reinforcement on the low velocity impact behavior of woven fabric reinforced composites: integrated contribution of the thermographic, interferometric and speckle inspections, ICCS16, Porto, June 2011.
  • Santulli C, Langella C, Concept transfer from biological junctions to end-of-life disassembly in industrial design, Biomimicry in Higher Education webinar, January 2011, 54-58.
  • Langella C, Santulli C, Design around nature Nature as inspiration and image renovation for sustainable materials. LeNS Design Conference, Bangalore (India), September 2010.
  • De Rosa IM, Marra F, Pulci G, Santulli C, Sarasini F, Tirillo' J, Valente M, Valente T, Comportamento dinamico di laminati compositi ibridi basalto/vetro con diverse sequenze di stratificazione: risultati preliminari, AIMAT Conference, Capo Vaticano, September 2010.
  • De Rosa IM, Iannoni A, Kenny JM, Puglia D, Santulli C, Sarasini F, Terenzi A, Environmentally friendly poly(lactic acid)/phormium tenax composite: thermal and mechanical characterization, ECCM 14, Budapest, June 2010.
  • Santulli C, Analisi di immagini termoelastiche da impatti su compositi in fibra di vetro tramite analisi di profilo frattale, Conferenza AIPnD, Roma October 2009
  • Caneva C, De Rosa IM, Santulli C, Sarasini F, Misure di localizzazione bidimensionale in emissione acustica su composito in polipropilene di riciclo e fibra di canapa, Conferenza AIPnD, Roma October 2009.
  • Caneva C, De Rosa IM, Santulli C, Sarasini F, AE monitoring of mechanical tests on plant fibre composites, EWGAE 2008 Conference, Krakow, September 2008.
  • Caneva C, De Rosa IM, Santulli C, Sarasini F, Characterization of indentation damage on carbon/epoxy laminates by means of acoustic emission, ECCM13 Conference, Stockholm June 2008.
  • Santulli C, Finn TJ, Celery hollow stem as a template for biomimetic composites and textiles, BAEC Conference, Southampton, March 2008.
  • Araneo R, Arrighetti W, Baccarelli P, Burghignoli P, Celozzi S, Cipri F, Frezza F, Lovat G, Maradei F, Paulotto S, Piuzzi E, Santulli C, Valente T, Nanomixtures for Electromagnetic Absorbers: Numerical Characterization of Effective Parameters, ISMOT Conference, Monteporzio Catone (Italy), December 2007.
  • Marzinotto M, Mazzanti G, Mazzetti C, Pompili M, Santulli C, Schiaffino P, Investigation on thermal endurance of PVC compounds for low voltage cable insulation, CEIDP 2007, Vancouver, October 2007.
  • Marzinotto M, Santulli C, Mazzetti C, Dielectric properties of oil palm-natural rubber biocomposites, CEIDP 2007, Vancouver, October 2007.
  • Santulli C (in Italian), Use of thermography for the detection of buried objects: opportunities and issues, 12th AIPnD Conference, Milan, October 2007 and E-Journal of Non-Destructive Testing vol.13 n.1, January 2009.
  • Santulli C, Falling weight impact properties of E-glass/jute hybrid laminates and non-linearity of their behaviour, ICEM 8 Conference, Brunel University, July 2007.
  • Santulli C, Measurement of surface void content on balsawood using transient thermography, BINDT2006 Conference, Stratford-upon-Avon, September 2006.
  • Santulli C, Measurement of impact-damaged areas in commingled E-glass/polypropylene laminates via thermographic images analysis, QIRT 2006 Conference, Padova, June 2006.
  • Santulli C, Jeronimidis G (in Italian), Laser vibrometry for quality control on fruits, 11th AIPnD Conference , Milan, October 2005 (ISBN 88-89758-02-3).
  • Santulli C, Jeronimidis G, Damage detection in fruits using Laser Doppler vibrometry, British Non-Destructive Testing Conference, Torquay, September 2004.
  • Patel SI, Davis FJ, Santulli C, Jeronimidis G, Mitchell GR, Smart actuators based on n-isopropylacrylamide gels, Biennial Polymer Conference, University of Reading, September 2003
  • Santulli C, Jeronimidis G, Vibration tests for non-destructive control in apples and avocados, British Non-Destructive Testing Conference, Worcester, September 2003.
  • Santulli C (in Italian), IR thermography for damage evaluation on automotive composites and components, 10th AIPnD Conference, Ravenna, April 2003.
  • Santulli C, Jeronimidis G, Patel SI, Davis FJ, Mitchell GR, Gel/composite coupling for variable stiffness actuators, 2nd PhD mini-conference, Reading, March 2003.
  • Santulli C, Jeronimidis G, Patel SI, Davis FJ, Mitchell GR, Development of smart actuators using n-isopropylacrylamide gels, World Conference on Biomimetics and Artificial Muscles, Albuquerque, New Mexico, December 2002.
  • Santulli C (in Italian), 3-D fibres and impact performance of commingled E-glass fibre/polypropylene composites, VI Congresso AIMAT, Modena, September 2002.
  • Rudd CD, Brooks R, Long AC, Warrior NA, Wilson MJ, Santulli C, Development of a crashworthy composite side intrusion beam using long glass fibre reinforced polypropylene for the foresight vehicle programme, SAE Conference, Detroit, March 2002.
  • Warrior NA, Rudd CD, Brooks R, Long AC, Wilson MJ, Santulli C, Development of a thermoplastic composite side intrusion beam, Lean Weight Vehicle Conference, Gaydon, October 2001.
  • Santulli C, Drezet D, Brooks R, Rudd CD, Relation between moulding conditions and mechanical and impact properties in commingled E-glass/polypropylene thermoplastic composites, EUROMAT Conference, Rimini, June 2001.
  • Santulli C, Brooks R, Long AC, Rudd CD, Wilson MJ, Warrior NA, Impact properties of thermoplastic laminates for automotive applications, Automotive Plastics and Composites Conference, Dunton, December 2000.
  • Santulli C, Cantwell WJ, Characterisation of the damage area in glass fibre reinforced composites using AE planar localisation, 15th World NDT Conference, Rome, October 2000.
  • Santulli C, Dulieu-Barton JM, Cantwell WJ, Thermoelastic investigation on impact damaged woven GRP composites, 4th MPSV Conference, Nottingham, September 2000.
  • Billi F, Santulli C, L'emissione acustica su prove a compressione di impianti dentari in titanio, IV Congresso AIMAT, Cagliari June 1998.
  • Billi F, Caneva C, Santulli C, Thermal damage analysis by combined thermographic inspection and AE localisation on honeycomb panels, 23rd Acoustic Emission Testing Congress, Wien May 1998
  • Santulli C, A study of the reliability of neural network approach to manage acousto-ultrasonics results on bonded joints, 23rd Acoustic Emission Testing Congress, Wien May 1998.
  • Santulli C, Billi F, L'emissione acustica su prove di trazione dopo impatto di laminati compositi tessuti, IX Conferenza Nazionale PnD, Padova September 1997.
  • Santulli C, Synergetic use of thermal and acoustic emission in studying tensile behaviour of fibre reinforced composites, 18th Risoe International Symposium on Materials Science, September 1997.
  • Santulli C, Monitoraggio termografico su prove di fatica di compositi in fibra di carbonio, XIII Convegno IGF, Cassino, May 1997.
  • Billi F, Santulli C, Stivali F, Reliability of glass fibre-epoxy adhesive joints under repeated loading cycles through acoustic emission and acousto-ultrasonic technique, EUROMECH 358, Nevers, Sept. 1997.
  • Billi F, Santulli C, A study on the mechanical behaviour of PSZ (5% wt. yttria) during bending tests comparing Weibull statistical model and acoustic emission results, Fracture Mechanics of Ceramics, Plenum Press, New York, 1996.
  • Tsamtsakis D, Wevers M, De Meester P, Santulli C, Damage characterization of fatigue loaded quasi-isotropic carbon epoxy laminates, using acoustic emission and .other nondestructive techniques, ICCE 3 New Orleans, July 1996.
  • Billi F, Santulli C, Effetto delle sollecitazioni di fatica sul peggioramento delle proprieta'� meccaniche di compositi a fibra di carbonio, XII Convegno IGF, Parma, June 1996.
  • Calabr� A, Esposito C, Billi F, Sangalli D, Santulli C, Buonocore V, Giordano M, Analysis of manufacturing problems related with metal-metal aerospace structural joints through acoustic emission and differential scanning calorimetry, 22th Acoustic Emission Testing Congress, Aberdeen May 1996.
  • Santulli C, Significato strutturale delle distribuzioni degli eventi di emissione acustica durante prove di trazione di materiali compositi, VIII Conferenza Nazionale PnD, Torino, October 1995.
  • Aiello A, Caneva C, Santulli C, Controllo di qualità di strutture sandwich mediante termografia ed emissione acustica, VIII Conferenza Nazionale PnD, Torino, October 1995.
  • Tatti M, Santulli C, Sensore in fibra ottica per l' acquisizione dei segnali di emissione acustica, VIII Conferenza Nazionale PnD, Torino, October 1995.
  • Calabro' A, Santulli C, Improving structural properties of metal/metal bonding by acoustic emission and ultrasonic inspection, International Symposium on materials ageing and component life extension, Milano October 1995.
  • Aiello A, Caneva C, Santulli C, Stivali F, AE monitoring in fatigue tests on Al2O3 reinforced aluminium alloy, AECM5 Sundsvall July 1995.
  • Santulli C, Solomos GP, Calabrò A, Caneva C, D'Antonio L, AE monitoring during cure cycle of metal/metal (2024 T3 alloy) adhesive joint for quality assessment, AECM5 Sundsvall July 1995.
  • Gariboldi E, Santulli C, Stivali F, Vedani M, Valutazione del danneggiamento in materiali compositi a matrice metallica tramite monitoraggio di emissione acustica, XI Convegno IGF, Brescia July 1995.
  • Aiello A, Caneva C, Santulli C, Qualità e manutenzione predittiva dell' affidabilità navale mediante controlli non distruttivi, II Convegno "Le nuove tecnologie dei materiali e le loro applicazioni in campo navale".Livorno April 1995.
  • Lucia AC, Solomos GP, Santulli C, Marini R, Caretta A, Valutazione della resistenza di strutture in materiale composito mediante emissione acustica, "Attuali applicazioni e prospettive dell'Emissione Acustica", CISE Segrate, November 1994.
  • Solomos GP, Lucia AC, Santulli C, Caretta A, Adhesive joint quality assessment via Acoustic Emission monitoring, 6eme Conference Europeenne sur les Controles non Destructifs, Nice October 1994.
  • Caneva C, Santulli C, Stivali F, Processing defects evaluation on metal matrix by means of acoustic emission, ICCE 2, New Orleans, July 1994.
  • Caneva C, Santulli C, Soloni A, Stivali F, Analisi dello scostamento dal modello teorico delle modalità di frattura di MMCs, X Convegno IGF, Torino, June 1994.
  • Billi F, Caneva C, Santulli C, Modalità di frattura a flessione con E.A. per la zirconia stabilizzata con yttria, X Convegno IGF, Torino, June 1994.
  • Caneva C, Santulli C, Stivali F, L'Emissione Acustica per la valutazione del comportamento micromeccanico di compositi a matrice metallica, 7a Conferenza Nazionale PnD, Ferrara October 1993.
  • Caneva C, Santulli C, Stivali F, Distribuzione delle sollecitazioni su recipienti a pressione in Filament Winding durante la prova idraulica, IX Convegno IGF, Roma, June 1993.
  • Caneva C, Pampallona A, Santulli C, L' Emissione Acustica per il controllo strutturale di complessi monumentali in marmo. Fontana di Trevi e Basilica palladiana, III Conferenza Internazionale PnD per lo studio e la conservazione delle Opere d' arte, Viterbo, October 1992.
  • EAMA Group (Emissione Acustica dai Materiali Aerospaziali), Bench Mark Exercise on AE Measurements from Carbon Fiber-Epoxy Composites, AECM 4 Seattle, July 1992
  • Caneva C, Franciosa A, Mazzola M, Santulli C, La valutazione della qualità su bombole in Filament Winding mediante Emissione Acustica, VIII Convegno IGF, Genova, May 1992
  • CONFERENCE ABSTRACTS AND POSTERS

  • Caruso AP, Infantino M, Nisini E, Ghelli D, Santulli C, Sarasini F, Minak G, falling weight impact characterisation of jute cloth/wool felts hybrid laminates, International Conference on Mechanics of Nano, Micro and Macro Composite Structures, Torino June 2012.
  • Marra F, Pulci G, Santulli C, Sarasini F, Tirill� J, Valente M, Static and dynamic behaviour of hybrid laminates with glass and basalt fibres: analysis of lay-up through impact tests and post-impact evaluation using acoustic emission, I meeting Assocompositi, Milano May 2011.
  • Santulli C, Langella C, Biomimetic design for addressing local issues, SDRC Conference, Inverness, November 2008.
  • Santulli C, Langella C, Biomimetic inspiration in the design of sport items: a workshop experience, Biomimetics 12, Bath, September 2007.
  • Johnson EA, Santulli C, Finn TJ, Bonser RHC, Jeronimidis G, Customized Intelligent Life-inspired Arrays, Biomimetics 11, Reading, September 2006.
  • Jiang D, Bibas A, Santulli C, Donnelly N, Jeronimidis G, Fitzgerald O' Connor A, Equivalent noise levels generated by the rotating burr on the ossicular chain as measured by Laser Doppler Vibrometry: A temporal bone study, MEMRO 2006, Zurich, July 2006.
  • Donnelly N, Santulli C, Bibas T, Jiang D, Fitzgerald O'Connor A, Effect of cochlear implant electrode insertion on middle ear transfer function as measured by intra-operative laser Doppler vibrometry, ARO Mid-Winter Meeting, Baltimore, February 2006.
  • Santulli C, Finn TJ, Seidel R, Jeronimidis G, Vibration of filiform hairs in house crickets (Acheta Domesticus) in response to induced airflow, ASAB Winter meeting, London, December 2005.
  • Patel SI, Davis FJ, Santulli C, Jeronimidis G, Mitchell GR, Smart actuators based on n-isopropylacrylamide gels, Biennial Polymer Conference, University of Reading, September 2003
  • Santulli C, Jeronimidis G, Patel SI, Davis F, Mitchell G, Development of smart actuators using n-isopropylacrylamide gels, Biomimetics 7 meeting, Reading September 2002.
  • Garcia Gil R, Santulli C, Long AC, Void content measurements in thermoplastic composite materials through image analysis from optical micrographs, Conference on Microscopy of Composite Materials, Oxford, March 2002.
  • Rudd CD, Brooks R, Long AC, Warrior NA, Wilson MJ, Santulli C, Development of a crashworthy composite side intrusion beam using long glass fibre reinforced polypropylene for the foresight vehicle programme, SAE Conference, Detroit, March 2002.
  • EUROPEAN COMMISSION TECHNICAL REPORTS

  • Kenny R, Santulli C, Interferometric fibre optic sensor for structural real-time monitoring and damage detection, Final report. Project reference number CSA96P27. May 1998. Technical Note No.I.98.93
  • Santulli C, Characterisation of fibre-optic transducers as acoustic emission sensors, Final report for contract N.13112-97-07 F1EI ISP I, JRC Ispra Dec.1997.
  • Santulli C, Albrecht D, Billi F, Solomos G, Design, realisation and operation of systems for structural integrity based on acoustic emission and holographic interferometry techniques, POP I Sicily Project Report, 12/1996.
  • Santulli C, Application of NDT techniques to real-time fatigue monitoring of carbon-epoxy composites, EU-JRC Tech.Note No.I.96.176 ( I part and II part )
  • Solomos G, Santulli C, Billi F, Elementi tecnici ed economici per la configurazione di un sistema multicanale per misure di emissione acustica, CEC-JRC Tech. Note No.I.96.49
  • Santulli C, Correlation between mechanical behaviour and acoustic emission data during tensile tests of metal matrix composites. Annual report 1995, CEC-JRC Tech.Note No.I.96.33
  • Santulli C, Acoustic emission monitoring during cure cycle for quality evaluation on adhesive joints. Annual report of activities 1994, CEC-JRC Tech. Note No. I.95.45 ISEI/IE/2916/95
  • OTHER REALISATIONS

  • Santulli C, The possible role of suture materials obtained from genetically modified silk, Report, Project Module SXN390, Open University 2007.
  • Bonser RHC, Harwin WS, Hayes W, Jeronimidis G, Mitchell GR, Santulli C, EAP-based artificial muscles as an alternative to space mechanisms, Final report, ESA/ESTEC Contract No 18151/04/NL/MV
  • Santulli C, Nottingham Express Transit Line 3: a tramline for Beeston and Chilwell. Opportunities and environmental issues, Project project, T860 course, Environment Decision Making: A System Approach, Open University, 2003.
  • Santulli C, Stain canker in plane trees, Project report, U206 course, Environment, Open University, 1997-98.
  • Santulli C, Frequently asked questions (FAQ) on tensile tests monitored by acoustic emission, Vallen Users's Group (VUG) letter no.6, June 1997.
  • Santulli C, Domande e risposte di metallurgia, Centro Didattico Baraldi, 1997-1998.
  • Lucchi G, Santulli C, Tecnologia dei materiali (part of CD/ROM "L'arco"- "The bow"), G. Lucchi & Sons Editor, Cremona, Oct. 1996.
  • Billi F, Santulli C, Valutazione con emissione acustica delle caratteristiche meccaniche di film sottile in materiale ceramico, ENEA Internal Report, September 1995
  • Caneva C, Santulli C, Applicazione dell'emissione acustica su giunti saldati in materiale termoplastico, Collaboration program ALENIA- Univ. di Roma-La Sapienza (1991)
  • INTERNAL REPORTS (University of Nottingham)

  • Santulli C, Drop-weight impact on the side intrusion beam trials (October 2000)
  • Santulli C, Brooks R, Impact properties of 3-D Parkhill commingled glass polypropylene fabric (July 2000)
  • Santulli C, Side intrusion beams moulding trials (May 2000)
  • THESES

  • Impact damage evaluation in woven composites using acoustic and thermoelastic techniques, PhD thesis, University of Liverpool, February 2000.
  • Experimental study using acoustic emission and strain-gauge measurements during hydraulic tests on Kevlar-epoxy pressure vessels. Failure characterisation and quality evaluation (in Italian), MEng thesis, Universita'� La Sapienza-Roma, 1990-91.
  • Filofascists and the Popular Party (1923-1926) (in Italian), MA thesis, Università La Sapienza-Roma, 2000-01.
  • The environmental and economic impact of using plant fibres for the production of low cost materials in developing countries, MSc dissertation (EDM), Open University, March 2005.
  • Seminars

    Back to Carlo Santulli's homepage